只有當固定式升降機http://www.idcapi.cn/帶負荷不能啟動時，才應該檢查液壓系統壓力，如果壓力低于正常范圍，才能調整溢流閥設定值。但是有些客戶在固定式升降機運行變慢時，為了能讓設備加速運轉而自行調整設備的出廠設置，這是不太可取的，在設備速度出現變化時，一定要與升降機廠家取得聯系，濟南美格斯升降機械會派專人給您調試，或通過電話指導，請您暫不可自己調整設備的設置。
The hydraulic system pressure should be checked only when the load is not started, if the pressure is lower than the normal range, the relief valve setting value can be adjusted. But some customers in the fixed hoist running slow, in order to allow the device to run at a higher speed and adjust equipment factory settings. This is less desirable, in the speed of the device when there is a change, be sure to get in touch with the elevator manufacturers, Jinan Meigs lifting machinery will send someone to your debugging, or by telephone guidance, please temporarily not adjust the equipment settings. 

固定式升降機http://www.idcapi.cn/購入使用后，由于使用不當或老化、污物使升降機產生了速度變慢的現象。固定式升降機速度變慢后，先考慮液壓油流量的因素。影響液壓油流量的因素有：液壓管路、液壓閥、液壓油泵、電動機調速裝置等。固定式升降機的溢流閥不可自行調整，出現問題請及時與廠家進行溝通，以免造成您的經濟損失。
Fixed hoist purchased after use, because of improper use or aging, lifts the dirt produced slow phenomenon. Fixed hoist speed slow, first consider the factors of hydraulic oil flow. The factors that affect the flow of hydraulic oil are: hydraulic pipeline, hydraulic valve, hydraulic pump, motor speed control device, etc.. Fixed lift of the relief valve can not be adjusted automatically, there is a problem with the manufacturers to communicate in a timely manner, so as not to cause your economic losses.